Welcome < Configuration < Stations < Jelli Interface
The Jelli Interface tab in the Station Configuration is used to configure the connection with a Jelli Device. This tab is typically hidden, contact RCS Support for assistance with enabling the Jelli Interface.
Click any area in this image for help
Click any area in this image for help
In this Topic: show/hideshow/hide
|
Important Note! |
The Jelli Interface requires Jelli Spots with a Jelli ID and the Spot Category "External Audio". Contact RCS Support for assistance with these Attributes. |
The Active setting will activate the Jelli Interface for the selected station.
The Jelli Device IP address field is used to enter the IP address of the Jelli Device on the local network.
The IP Port is the IP Port the Jelli Device will use to communicate with the Jelli Interface in Zetta.
Welcome < Configuration < Stations < Jelli Interface
© 2007-2024 RCS All Rights Reserved.
